All stainless steel nitrogen valve
All stainless steel nitrogen valve
Nominal pressure: 1.0,1.6 MPa
Main material: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti
Valve, valve seat: 1Cr18Ni9Ti Stellite Surfacing
Design criteria: GB / T17213
Length of the structure: GB12221-89
Testing standards : GB / T4213
Flange standard: JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113, HG20594-97, HG20618-97, etc.
Product description:
Pressure regulator without additional energy, the use of the media itself is the media as the power source. Automatically control the valve medium flow, so that the pressure after the valve to maintain a constant pressure stabilizer. Has been widely used in continuous gas acquisition and transportation of natural gas, urban gas and metallurgical, petroleum, chemical and other industrial production sector.
Valve Features: Control of high precision, general than ZZY type direct operation of the regulator about double high. Adjust the pressure ratio (such as the valve before 0.8MPa, valve 0.001MPa) is particularly suitable for micro-pressure gas control.
Pressure set in the pilot to achieve, so convenient, fast, labor-saving time-saving can be run continuously set.
Part Information:
Body, bonnet: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti
Spool, seat: 1Cr18Ni9Ti Stellite alloy surfacing
Filler: Teflon
putter, bushing: 2Cr13
Technical Parameters:
Nominal diameter DN (mm) | 20 | 25 | 40 | 50 | 80 | 100 | 150 | |||||
Seat diameter (mm) | 6 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
Rated flow coefficient KV | 3.2 | 5 | 8 | 10 | 20 | 32 | 50 | 80 | 100 | 160 | 250 | 400 |
Pressure adjustment range Kpa | 0.5 to 7 5 to 20 15 to 50 30 to 150 | |||||||||||
Nominal pressure PN (MPa) | 1.0 1.6 | |||||||||||
The media temperature is adjusted (℃) | -20 ~ 90 | |||||||||||
Flow characteristics | Go ahead | |||||||||||
Adjustment accuracy (%) | ≤ 3 | |||||||||||
Actuator film effective area (cm 2) | 200 | 280 | 400 | |||||||||
Allow leakage | In line with ANSIB16.104-1976 level IV | |||||||||||
Specifications Weight:
◆ Overall dimensions
Nominal diameter (DN) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
Flange end distance (L) | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 |
H | 610 | 610 | 630 | 630 | 640 | 710 | 720 | 730 | 800 | 930 |
H1 | 330 | 330 | 350 | 350 | 360 | 430 | 440 | 450 | 520 | 650 |
φ | 310 | 400 | ||||||||
D | 105 | 115 | 140 | 150 | 165 | 185 | 200 | 220 | 250 | 285 |
D1 | 75 | 85 | 100 | 110 | 125 | 145 | 160 | 180 | 210 | 240 |
D2 | 56 | 65 | 76 | 84 | 99 | 118 | 132 | 156 | 184 | 211 |
nd | 4-14 | 4-18 | 8-18 | 8-22 | ||||||
Scan QR code
|
